How To Connect A Cable Modem To A Linksys Router For Wireless Internet

The Linksys router is made by Cisco. Like otherType "ipconfig /release" then hit "Enter" on your
wireless routers, it turns the signal from a modemkeyboard. Next type "ipconfig /renew" and hit
connected to the Internet via phone line or cable"Enter" again. Write down the IP address that
line into a wireless signal that can be picked up byappears on the screen. Unplug your computer
desktop computers, laptops, notebooks, PDAs,from the modem and plug it into the router.
phones, game consoles and even printers.Type "ipconfig /release" then hit "Enter" on your
Routers such as Linksys allow you to havekeyboard. Next type "ipconfig /renew" and hit
wireless networks and Internet in your home so"Enter" again. Write down the IP address that
that you can use your devices from anywhere onappears on the screen. Open your Web browser
your property. Place the router near the modem.and go to the address provided in the router's
Attach all the antenna to the router. USBinstructions to get to the administration screen.
WIRELESS LAN Adapter(WIRELESS USB LANNetwork Device(USB Wireless LAN Adapters )
Adapter)Choose "Clone Mac Address." This may take a
Make sure the router is an open area. If it isfew minutes. Plug the router into the modem
surrounded by metal or cinder block the signalusing the cable you hooked up to the "Internet"
may not be able to travel. Look for the portport of the router. Click on "DHCP Renew" in your
labeled "Internet" on the back of the router.browser. Unhook your computer from the router.
Attach the Ethernet cable to the "Internet" port.As long as your computer has a wireless card
An Ethernet cable looks like a large phone cableyou can connect to the Internet wirelessly.
and can just be inserted right into the back of theIf your computer does not have a wireless card
router. Start your computer. With the computerthen you will have to plug your computer back
connected to the modem, open the start menuinto the modem to connect to the Internet. You
and the Command Prompt. Command Prompt iscan always plug your computer back into the
located under "All Programs" and "Accessories."PCIrouter if you need to change settings at a later
Wireless LAN Card(Wireless PCI LAN Cards)time.