How to Install Your Own Wireless Network

Before embarking upon setting up your wirelessyour router sometimes. Just enter the password
network, you need to have a clear idea of whatthat your router comes with and do not be
you want from it. At first, decide on the numbertensed because this is just a matter of changing
of computers, their respective locations and thesome techniques and not as complicated as
addition of any peripherals like the printer. Theserocket science! In the SSID section, you will need
are the basic things that you need to determineto put in your network name. Ensure that this
the technology that will suit you best. Generally,name is not extremely obvious as a very easy to
the most recommended equipment for wirelessguess network name may lead to security
network installation is the 802.11g technology. It isproblems. Another section requires you to enter
generally preferred due to its almost universalthe WEP and WPA. Be clever and enter
compatibility.something that is difficult to guess and will
Given below is the list of equipments that you willprevent hackers from taking ill advantage of your
require for your wireless network installation:o Anetwork. This is something that you do not need
fast and good broadband connection.o A wirelessto remember so make it long and complicated.
routero A wireless network adaptoro A USBThe next important thing is to enter the
adaptor for desktops and a PC card adaptor foradministrator's password. This is something that is
a laptopvery important and make sure that this contains
It is a clever decision to buy the network adaptora combination of letters and numbers. Once all this
and the wireless router from the sameis done, disconnect the network cable.
manufacturer for better compatibility. SomeOne important thing in the wireless network
personal computers have the wireless networkinstallation is that you must have Windows
adaptor as an in built feature. In that case you doService Pack 2 on your computer. Go over all
not have to buy a new one. Once thesethese steps for all the computers on your
equipment are ready, you are all geared up tonetwork.
enjoy the benefits of wireless networking.If you have a USB network adaptor, connect this
With the equipment at hand, all you have to do isto your computer. For a laptop, plug the USB
install them properly. At first, connect yournetwork adaptor in your expansion slot. Windows
modem to the wireless router. When you boughtwill understand that there is a new hardware and
this router, there was a cable with it. Use thisask you to put in the CD that accompanies the
cable to connect the modem and the router,hardware. Insert the CD and follow all the
attach the end labeled Internet/WLAN/LAN to theinstructions that appear on your screen. After this
router. In case of any confusion, refer to theis done, you will notice that there is a new icon on
user manual that you get with the router. Oncethe taskbar. Right click this icon and select the
this is done, put on your modem and establish theoption of "view available wireless networks". Now
internet connection once again. Ensure that theyou will come across your very own wireless
router is turned on too. After about 45 seconds,network, if not, then click refresh. Once the
you will see lights that indicate that the router isnetwork name arrives, select "connect" and enter
connected to the modem.the network key. This done, sit back and wait
The next step in your wireless network installationuntil the connection is established. Once the
is configuring your modem. Start the internetwireless network installation is done, go ahead and
explorer and enter the address bar specific toenjoy its benefits!
your router. This requires the default password of