Making The Bsnl Dataone Wireless Home Network Guide

e is my Step-By-Step guide to configuring a Wi-Fi·Click on Apply and allow the modem to restart
network with BSNL DataOne. Though many·Open the Network properties of your Ethernet
wireless routers claim that it is a no-brainer setupcard and change the IP properties to the following
to configure the wireless network, I found it toIP Address ? 192.168.1.2
be not as easy as it looks to be. For example,Subnet Mask ? 255.255.255.0
NetGear comes with a wizard that never worksDefault Gateway ? 192.168.1.90
with BSNL broadband connected via HUAWEIPreferred DNS server ? 61.1.96.69 (BSNL DNS
SmartAX 880. For those of you desperate toServer IP)
take your BSNL DataOne broadband wireless,Alternate DNS server ? 61.1.96.71 (BSNL DNS
follow these steps. It took me more than 2 daysServer IP)
to figure and come out with these configuration·Open your browser and type your favorite
details.URL. You should be online by this time!
Before I start, let me share what I have:2)Configuring the Wireless Router and enabling the
1)BSNL DataOne 256Kbps connection.WPA security
2)HUAWEI SmartAX MT880 (The modem·Connect the network cable from the NetGear
supplied by BSNL).wireless router to the machine.
3) (configuring netgear dg632 for BSNL)NetGear·Open the IP Properties of your Network card
WGR614v5and Enable DHCP. Select the following on the IP
There are 2 steps to configuring your wirelessproperites dialog.
network. First, you have to change the defaultObtain IP Address Automatically
settings of the SmartAX MT880 modem andObtain DNS Server Address Automatically
configure it to enable PPPoE (PPP over Ethernet).·Open the browser and type
Second, you have to configure the NetGear·Enter ?admin? as username and ?password? as
Router to talk to the modem.the password
Keep your modem, wireless router and your·Click on Wireless Settings link on the navigation
username and password from BSNL handypane and configure with the following values
before you proceed to the next step.Wireless Network
If you want to change your existing configuration,Name (SSID) -
take a backup of your configuration. This guide isRegion ? Asia
to build your network from the ground-up.Channel ? 11
1)Configuring and testing your BroadbandMode ? g and b
connectionSecurity Options
·Setup the modem as per the instructionsWEP (Wired Equivalent Privacy)
mentioned in the manual. Ensure that the RJ11Security Encryption (WEP)
(thin) cable from the splitter is connected to theAuthentication Type ? Automatic
ADSL port and the RJ45 cable connects yourEncryption Strength ? 64bit
machine to the Ethernet port of the modem.Security Encryption (WEP) Key
·Change the IP properties of your Ethernet cardPassphrase -
to the following:·Click on Generate
192.168.1.2·Record the value of Key1 ? This is required
255.255.255.0when you log on to your Wi-Fi network the first
192.168.1.1time.
·Open the browser and type to go to the·Click on Apply and wait till the router reboots
HUAWEI configuration tool.(Wireless will not be enabled till you complete the
·Enter ?admin? as username and ?admin? asnext step)
password·Click on the Basic Settings link on the left side
·Expand the Home node and select the WANnavigation pane and configure the following
SettingDoes your Internet connection require a login? ?
·Under this web page, configure the following:No
PVC Number ? PVC 0Account Name ? blank
Wan Type ? PPPDomain Name ? blank
Connection Type ? PPPoEInternet IP Address
VPI/VCI ? 0 / 35Use Static IP Address
Default Route - EnabledIP Address ? 192.168.1.91
User Name ?IP Subnet Mask ? 255.255.255.0
Password ?Gateway IP Address ? 192.168.1.90
Use DNS ? EnabledDomain Name Server (DNS) Address
Max Idle Time ? Always OnUse These DNS Servers
·Click on Apply and allow the modem to restart.Primary DNS ? 61.1.96.69
·Close the browser windowSecondary DNS ? 61.1.96.71
·Open the browser and typeRouter MAC Address
·Enter ?admin? as username and ?admin? asUse Default Address
password·Click on Apply and wait till the router restarts
·You should see the Summary page. The Status·Connect the Network Cable coming from the
is normally Red indicating that the connection isADSL Modem to the Wireless Router
not ON.Few things to remember ?
·Click on the Plug icon in the Note column to·Don?t connect the ADSL Lan Cable to the
connect.Internet Uplink port of the Wireless Router. It
·After the Connecting message, you should seenever worked for me. Always connect it to one
the summary page again with the Status turningof the 4 ports excluding the designated Internet
Green. Notice the IP Address and the Gatewayport.
Address.·IP Addresses can be anything of your choice.
·Expand Tools node and click on Misc.But it is a good idea to follow the 192.168.x.x
·Type and click on Pingconvention
·You should see Ping Result: Successful·If you get lost any time, feel free to reset the
·Click on the Lan Settings link under theconfiguration by poking a pin into the reset slot on
Advanced node.the modem and the router.
·Configure the following:·Don?t compromise on the security. Always
IP Address ? 192.168.1.90enable WPA and save your key. Don?t let your
Subnet Mask ? 255.255.255.0(/24)friendly neighbors ride on your network!
Local Domain Name ? Blank